Posca PC ALL SIZES SET/8 WHITE
Non-toxic, water-based POSCA paint markers can be used on almost any surface, and are loved by professionals, creative hobbyists and amateurs alike. The alcohol and solvent-free opaque paint covers well, is blendable, dries quickly and can be overlaid when dry. ACMI certified and made in Japan.
8-Marker All White Set: all eight tip sizes in white (PCF-350 brush, PC-1MR extra-fine, PC-1M extra-fine tapered, PC-3M fine, PC-5M medium, PC-7M broad, PC-8K broad chisel, PC-17K extra-broad
Using Posca is as easy as ....
PREPARE THE POSCA MARKER
Shake the marker energetically up and down with the cap on. You will hear the ball inside clicking announcing that the paint colour inside the POSCA marker is being mixed.
PRIME AND TEST THE MARKER
Press the tip several times on a spare piece of paper until the tip is filled with paint. Test the flow on your spare paper – if the line is clear, your POSCA is ready. It is useful to keep a cloth at hand to clean the tip easily or absorb any excess paint.
If the paint flows less freely during use, shake the marker again without forgetting to put the cap on first to avoid paint projections. Re-prime the tip and off you go again!
If necessary, you can clean the tip under the tap as often as you want. If it gets very dry, you can even leave it to soak in water overnight.
If the tip becomes damaged, it can be turned round or even replaced with a new tip bought separately.
Reversible tips: PC-3M and PC-5M
Replaceable tips: PC-1MC, PC-3M, PC-5M, PC-7M, PC-8K, PC-17K.
POSCA markers can be kept in any position as long as the cap is firmly put back on after use. The ball inside can be used to mix the paint, which is perfectly conserved inside the body of the marker. The brush-tipped POSCA should be kept horizontal if possible.